• step 1 of 6

    Primer

    The first step is to apply a layer of the self-leveling primer onto a clean surface. The primer acts as a base for the next layers, and it also garantees the resin's mechanical features.

  • step 2 of 6

    Decò

    The second step is where we create the desired effect of the resin, chosen from one of three available effects. With the use of a spatula you create the desired effect, this layer will be repeated until the base is completely covered.

  • step 3 of 6

    Sanding

    The sanding step is necessary to eliminate any unevenness from the resin layer, in order to create a smooth and even look. This step can be repeated more than once if necessary.

  • step 4 of 6

    Resin on resin

    A new layer of resin is spread. Overlapping various layers of resin with the use of a spatula will create the desired effect. Here we are doing a cement effect, typical for this collection.

  • step 5 of 6

    (re)sanding

    The sanding step is necessary to eliminate any unevenness from the resin layer, in order to create a smooth and even look. This step can be repeated more than once if necessary.

  • step 6 of 6

    Protection

    The last layer of the resin floor is the protective layer, which is applied with a roller. This last layer will only protect the surface, and wil not change the surface in any way.

we are using

Cemento Liquido